Bell-bottoms are characterized by a silhouette that flares from the knee to the hem.
It’s hard to find a pair of bell-bottom denim jeans that fits perfectly without needing the hem adjusted, isn't it?
So in this article, we will cover:
- Can you wear bell-bottoms without hemming them?
- Will hemming ruin their shape?
- Is it more difficult to tailor them compared to straight-leg denim?
We’ll be introducing these topics and more!
If you have a pair of bell-bottoms that are too long, or if you're thinking of buying some, this is a must-read!

Zimbabwe Cotton Bell-bottom Jeans - Red Color Denim / Unisex
Can you wear bell-bottoms without hemming?

To put it bluntly, it's difficult to wear bell-bottoms without hemming them.
If they are just a little long and dragging on the ground, you might be able to get away with it (though you'll likely get them dirty...).
However, it is hard to roll them up like you would with straight-leg denim.
The hem will just slide down, and they won't hold the fold.
And above all, the shape will be ruined.
Since you would be losing that unique line that flares toward the hem, there's really no point in wearing bell-bottoms in the first place.
I understand the feeling that hemming is a hassle, but it's easily solved by taking them to a tailor.
If you're going to wear them, wear them in their best possible form!

Bell-bottom Jeans - Used Color / Unisex
Will the shape change after hemming?
The most distinctive feature of bell-bottoms is the area below the knee.
Because of this, many people worry, "Will the shape be ruined if I cut it for hemming?" or "Will it lose half of its charm?"
I can’t say for sure that it will be perfectly fine.
This is because whether the silhouette changes when hemming bell-bottoms depends on:
- How much the hem flares.
- How much length you are cutting off.
Here is an image of the area below the knee of a pair of bell-bottoms I personally own.

They have a decent amount of flare.
I wear these without cutting them, and when I measured the hem width, it was 28 cm.

If I were to hem these by 10 cm, the hem width would be…

(Measuring around 10 cm from the hem.)
It would finish at about 26 cm.
You might think a 2 cm difference isn't much, but when you consider the circumference of the hem, that's a 4 cm reduction, so it looks quite different when worn.
It gives a much more subdued impression...
(If it's just a few centimeters of hemming, I don't think the silhouette will change that much.)
So, for these particular bell-bottoms, I gave up on wearing them with sneakers! Haha.
To maximize the beauty of the silhouette, I wear them with heels without hemming them.
If you're worried about whether to hem your own pair of bell-bottoms, it might be worth consulting a tailor!
(Please check with your local clothing repair shop to see if you can try them on for consultation.)

Is it more expensive than hemming straight-leg denim...?
The standard price for hemming jeans is also covered in this article: →Is it okay not to hem your jeans? A former tailor explains the key points.
Basically, the price of hemming only varies depending on the sewing method, not the shape of the jeans.
However, this changes if you need to take them up significantly.
For example...

I've folded them outward significantly here for clarity.
(Normally, for hemming, you cut to the length required for a triple fold and fold it inward, but it's hard to explain with an image, so I did this instead...)
If you shorten bell-bottoms significantly, you get excess fabric like this (see the arrow in the image).
Since you'll need to adjust the hem width as well, you'll be charged for width adjustment in addition to the hemming fee.

However, if you narrow the stitch width, you will rarely need to adjust the hem width.
(Because if the stitch width is narrow, the difference between the circumference of the hem and the circumference where you are sewing becomes smaller.)
If you aren't that particular and want to keep repair costs down, I recommend consulting the tailor about this.

Bell-bottom Jeans - Used Color / Unisex
What are some recommended bell-bottoms that offer free hemming?

To wear them in your perfect size while maintaining their beautiful shape... it's best to have the manufacturer hem them for you from the start!
The BOBSON Online Shop offers free hemming at the time of purchase.
Each size's waist, hip, thigh width, front rise, hem width, and inseam are listed on the product page, so first select a size based on the hips and thighs.
Then, decide the inseam length based on a pair of jeans you already own.
Take a look here for how to measure the inseam length: →How to measure the inseam of your pants - includes a video guide even beginners can follow
BOBSON has two types of bell-bottoms.

[Model Height: 168 cm, Size Worn: 26]
These Bell-bottom Jeans - Used Color have an exquisite fade.
The shading of the denim also provides a great leg-lengthening effect.

[Model Height: 172 cm, Size Worn: 26]
This is the Bell-bottom Jeans - One-wash.
Because they are a deep navy, you can style them in a dressier way.
I think this is a great pair for bell-bottom beginners to start with.

[Model Height: 174 cm, Size Worn: 30]
This is also the Bell-bottom Jeans - Used Color.
BOBSON bell-bottoms are unisex, so they can be enjoyed by anyone, regardless of gender.
The three models have different heights and wear different sizes, but you can see that they are all wearing the jeans while retaining the bell-bottom shape, right?
Please enjoy a beautiful, perfectly-sized pair of bell-bottoms yourself.
